makershala announcement speaker phone image
Join the Parent Board & enjoy exciting benefits. Details here
21st century parent parent of 8 to 16 years old kids parents of stem learners

Building a Smarter Future: DIY Forest Fire Detection System Using ESP32 and Flame Sensor

Building a Smarter Future: DIY Forest Fire Detection System Using ESP32 and Flame Sensor

 

 

Introduction:

Forest fires are a growing concern around the world, endangering ecosystems, wildlife, and human lives. In the face of this challenge, technology comes to the rescue. In this blog, we'll explore a DIY project that combines the power of the ESP32 microcontroller and a flame sensor to create a smart forest fire detection system. This innovative project showcases how accessible technology can be harnessed to protect our natural environments.

Understanding the main components- ESP32 and Flame Sensor

  1. ESP32 Microcontroller -It is a powerful and versatile device that serves as the brain of the forest fire detection system. It is a low-cost, low-power consuming microcontroller that offers built-in Wi-Fi and Bluetooth capabilities, making it an ideal choice for IoT (Internet of Things) applications.

 

The ESP32 microcontroller is equipped with a dual-core processor, which enables simultaneous execution of multiple tasks and ensures efficient performance. It also features a wide range of input/output pins, allowing for easy integration with various sensors and modules.

 

  1. Flame Sensor- The flame sensor, as its name suggests, is responsible for detecting the presence of flames or fire. It utilizes an infrared sensor to detect the emission of infrared radiation, which is typically emitted by fire.

The flame sensor consists of an infrared receiver and an infrared transmitter. The infrared receiver detects the infrared radiation emitted by fire, while the infrared transmitter emits a signal to determine the distance between the flame sensor and the fire source.

 

When a fire is detected, the flame sensor sends a signal to the ESP32 microcontroller, triggering an alert or activating additional safety measures as programmed in the system. This real-time detection capability is crucial in preventing the spread of fires and minimizing the potential damage caused.

Step-by-Step Guide: Building Your DIY Forest Fire Detection System

Before getting started, ensure that you have all the required materials and tools. Here's a list of what you'll need:

Step 1: Gather the Necessary Materials

- ESP32 microcontroller

- Flame sensor module

- Jumper wires

- Breadboard or PCB (Printed Circuit Board)

- LEDs (Light-Emitting Diodes)

- Resistors

- Power supply (battery or USB power source)

- Connecting wires

- Computer with Arduino IDE or compatible programming platform

Step 2: Set Up the ESP32 Microcontroller

Begin by setting up your ESP32 microcontroller. Connect it to your computer using a USB cable. Install the necessary drivers if prompted.

Open the Arduino IDE or compatible programming platform and configure it to work with the ESP32 board. Make sure to select the correct board and port in the Tools menu.

Step 3: Connect the Flame Sensor

Next, connect the flame sensor module to the ESP32 microcontroller. Use jumper wires to establish the following connections:

- Connect the VCC (Voltage Common Collector) pin of the flame sensor to the 3.3V or 5V pin of the ESP32.

- Connect the GND (Ground) pin of the flame sensor to the GND pin of the ESP32.

- Connect the OUT (Output) pin of the flame sensor to any available GPIO (General-Purpose Input/Output) pin of the ESP32. Note down the pin number as it will be used in the programming step.

Step 4: Add LED Indicators

To provide visual feedback, you can add LEDs to indicate the status of the fire detection system. Connect LEDs to GPIO pins of the ESP32 as follows:

- Connect the anode (long leg) of each LED to separate resistors (for current limiting purposes).

- Connect the cathode (short leg) of each LED to different GPIO pins of the ESP32.

- Connect the other ends of the resistors to the GND pin of the ESP32.

Step 5: Write and Upload the Code

Now it's time to write the code for your DIY forest fire detection system. Open a new sketch in the Arduino IDE and write the code that defines the behaviour and logic of your system.

Use the appropriate functions and libraries to read input from the flame sensor and control the LEDs. You can set a threshold value to determine when the system should trigger an alert or activate additional safety measures.

Once you have finished writing the code, upload it to the ESP32 microcontroller. Ensure that the correct board and port are selected in the Arduino IDE and click the upload button.

Step 6: Alert Mechanism

   - Implement an alert mechanism using the ESP32's built-in Wi-Fi capabilities using Blynk cloud

   - When the flame sensor detects a potential fire, the ESP32 should send an alert to a designated mobile application or Blnk cloud

Step 7:Real-time Monitoring

   - Access the data from the flame sensor and ESP32 remotely through Wi-Fi using blynk .Monitor the data using your smartphone, tablet, or computer to keep an eye on the forested area's safety.

Step 8 :Testing

1: Create a Testing Environment

Set up a controlled environment to simulate different fire scenarios. This can include using a controlled flame source, such as a lighter or candle, at various distances from the flame sensor. Ensure the testing area is well-ventilated and free from flammable materials.

2: Monitor the Output

Observe the behavior of the system when exposed to the controlled flame source. Pay attention to the LED indicators and ensure that they accurately reflect the presence and intensity of the flames. Take note of any false positives or false negatives.

3: Adjust Threshold Values

Fine-tune the system by adjusting the threshold values used to determine when the system should trigger an alert or activate safety measures. This can be done by modifying the code on the ESP32 microcontroller. Consider factors such as the sensitivity of the flame sensor and the desired level of sensitivity for detecting fires.

 4: Perform Multiple Test Runs

Repeat the testing process multiple times, varying the distance, intensity, and duration of the controlled flame source. This helps validate the system's consistency and reliability across different fire scenarios. Make note of any adjustments needed throughout the testing process.

5: Evaluate and Validate Results

Analyze the test results and evaluate the system's performance. Compare the system's detection capabilities to known fire incidents or data to validate its accuracy. Assess the system's ability to detect fires quickly and reliably.

6: Calibrate the Sensors

If necessary, calibrate the flame sensor to ensure its readings are accurate and aligned with the desired sensitivity. Follow the manufacturer's instructions or consult relevant resources on sensor calibration to make precise adjustments. This step is crucial for maintaining the system's accuracy over time

Benefits of the Project:

  1. Timely Alerts: The project provides real-time alerts when a potential fire is detected, enabling rapid response and prevention.
  2. Cost-Effective: ESP32 microcontrollers are affordable and readily available, making this project a cost-effective solution.
  3. Remote Monitoring: The built-in Wi-Fi capabilities of the ESP32 allow you to remotely monitor the forested area's status without being physically present.
  4. Expandability: You can enhance the project by integrating additional sensors like temperature and humidity sensors for more comprehensive monitoring.

Conclusion:

The forest fire detector project, using an ESP32 and a flame sensor, exemplifies how technology can contribute to the preservation of our natural ecosystems. By combining accessible components and coding skills, you can create a smart detection system that aids in early fire detection, thus playing a pivotal role in protecting forests and ensuring a sustainable future. This project is a testament to the potential of DIY technology solutions in addressing real-world challenges.

 

https://drive.google.com/file/d/1mY5Vmb-OwJunpxndepe9xYDKczBIt0EI/view?usp=sharing

 

 

 

 

 

 


Fire eye
Published by
Fire eye
TEAM

footer_svg

About Makershala

Makershala is a Learning by Making ecosystem for kids from age 8-16 to help them discover their interests, develop future skills and deepen conceptual understanding. Makershala follows the Project Based Learning approach as its way of teaching in which kids work on authentic, real life & personally meaningful projects.

Kids work on these projects in different educational settings, namely; self-learning; online 1:4 Peer to Peer with a mentor; or in a school. Projects are categorized in different interest segments like Robotics, Coding, Electronics, 3D Printing, Animations, Photography, Machine Learning, Astronomy and many more.

Each project is mapped with classroom concepts, 21st century skills, UN sustainable development goals and interests/careers to not only focus on holistic development of a child but help them identify their calling by giving them exposure to problems that exist in the real world.

Why Project-Based Learning

Project-Based Learning has the potential to solve many of the learning problems we see today beyond foundational literacy.

  • Ownership: Learners have complete ownership on what they need to know to solve a problem and come up with the best solution in the best way. It can be a concept or a software tool or a skill. Kids involved in projects are never required to be told to study.

  • Interdisciplinary: Unlike traditional learning where subjects are taught in silos and learners develop a perception of liking or disliking a subject. In project based learning, the given problem is supreme and it may require to know something from maths, science and history together.

  • Experiential learning: We generally retain 75% of what we do as opposed to only 5% of what we hear and 10% of what we read, hence PBL helps kids retain what they learn.

  • Lifelong learning: The most important gift that PBL gives to its learners is to make them lifelong learners as this is the most required skill to lead a good life, personally & professionally.

  • Skills & Knowledge balance: Project-based learning doesn’t focus too much on memorizing information, rather it equally demands practising life skills to be able to do better in projects.

How Makershala Works

  • Parents and Kids who wish to start their journey with Makershala, are suggested to pick one interest area of the child and then choose a plan.

  • Parents and Kids after enrolling in a course based on their interest are assigned a batch. Each batch has 3-4 learners and 1 mentor.

  • Each course has 6 guided projects and 1 challenge project.

  • During the project, formative assessments are conducted to evaluate learner’s knowledge & skills.

  • On completion of a project parents and kids get a learning report which indicates the skills and knowledge developed/displayed by them.

  • Kids also build their portfolio which showcases problems solved, solutions created, skills developed, knowledge acquired and technologies learnt.

  • Kids earn rewards in the form of badges, points and coins for their performance in a project, course and overall.

  • Kids are maneuvered to take up courses and projects from different learning segments to gain more clarity on their interests. This eventually helps them in picking up a career.